26 Jan, 2024

Idle current/power consumption without load

2024-02-15T17:32:11+01:00January 26th, 2024|

Idle current — the power draw for just the device electronics varies between 0.6W and 0.75W. We rate it in watts because of the wide input voltage range. To quickly calculate idle current draw, divide 0.75 by [...]

19 Jan, 2023

Download of Firmware, Software, USB driver for RC4 dimmers

2023-03-28T19:03:38+02:00January 19th, 2023|

Download firmware, software, USB driver for all RC4 dimmers here: https://rc4wireless.com/download/ These free-of-charge files are required for CodeLoader cable (Update of dimmer firmware for more functions), if required please install the USB driver for the CodeLoader cable [...]

23 Aug, 2022

Dongle Mode for RC4 Commander Software

2022-08-24T11:49:10+02:00August 23rd, 2022|

Instead of the USB dongle X-Stick (included in the accessory kit) - for wireless configuration of the dimmers with the free Commander Software - any RC4 Magic 2.4 GHz dimmer (except the DMX2dim micro) can be used [...]

6 May, 2022

What battery should I use?

2022-05-06T12:59:25+02:00May 6th, 2022|

Important factors to consider are: The overall running time you need between battery charges The space you have available for everything to fit, and Sometimes the most difficult things — your budget constraints and timeframe to get everything [...]

5 May, 2022

Assign DMX-channels to an RC4 dimmer

2022-05-05T22:41:21+02:00May 5th, 2022|

The DMX channel assignment for a DC output is identical for all RC4 Magic 2.4 GHz, LumenRadio and W-DMX receivers according to the ONETOUCH procedure. This procedure requires the dimmer, a transmitter (DMX tester or a DMX [...]

5 May, 2022

Change private ID on RC4Magic dimmer

2022-05-06T10:11:46+02:00May 5th, 2022|

valid only for RC4 Magic Dimmer DMX2dim, DMX2micro, DMX4dim und DMX4dim500, DMX6dim und DMX6dim-500 Several RC4 Magic systems can be used simultaneously at the same location. For this purpose, different private IDs must be used. There [...]

5 May, 2022

Change digital persistance

2022-11-17T14:26:39+01:00May 5th, 2022|

Change digital persistance for LEDs with ISL dimmer curve The inertia simulation (digital persistance) can be changed for all RC4 wireless dimmers. This changes the response time of the LEDs when dimming. This change makes [...]

22 Apr, 2022

Change PWM Frequency on a dimmer

2022-05-06T09:22:04+02:00April 22nd, 2022|

PWM Frequency selection is a Long-Press Button Feature, and the selected frequency is confirmed using patterns of two LEDs. To cycle through available PWM frequencies: Ensure live DMX data is streaming in by either wire (miniplug input) [...]

18 Nov, 2018

Factory reset RC4 dimmer

2022-08-24T09:55:52+02:00November 18th, 2018|

Performing a Factory Reset : If someone else has used your dimmer, or you just want to get back to a known configuration, performing a factory reset is easy: Power on the device. The green COP indicator will [...]


Go to Top