Powersensor
The PowerSensor can synchronize an effect of a switched / destroyed practical with film lighting by electrical detection.
This product is discontinued.
Jan 19, 2026 - Jan 22, 2026
Description
Automatically synchronize film lighting with a switched practical.
The PowerSensor can synchronize an effect of a switched / destroyed practical with film lighting by electrical detection.
Simply plug-in the practical into the detection input.
The PowerSensor can trigger any preset/effect producible with the LFXHub by electrical detection.
Control an unlimited load of lamps connected at the DMX-512 output of the LFXHub – with a switched practical.
No re-wiring of practicals required, just plug & play.
The Powersensor is the choice for SFX related sync of lighting effects.
Let the talent switch the set lighting!
Additional information
| Weight | 1,5 kg |
|---|---|
| connector version lfxhub | BS 1363, Schuko |
Specifications
| order code | pose |
|---|---|
| operating voltage | 200…240 VAC/50…60Hz |
| operating temperature | 0°C …70°C (32°F … 158°F) |
| dimensions (l x w x h) | 168 x 108 x 59 mm (6.7″ x 4.3″ x 2.4″) |
| weight | 920 gramms (2 pds) |
| includes 3.5 m control cable | plugged into analog INPUT of the LFXHub |
| Detection circuit | |
| load detection voltage | 200…240 VAC/50…60Hz |
| max. detection load | 1100 W |
| min. turn-on load (low mode) | 25W |
| min. turn-on load (high mode) | 40 W (for inductive loads) |
| max- turn on delay | 13 msec |
| all specifications are subject to change without prior notice | |
Downloads
PowerSensor for LFXHub (668 kB) PDF |
| PowerSensor für LFXHub (545 kB) PDF |
