DMX-IN Adaptor
Provides a DMX-IN port for all RC4 DC dimmers. This simple adaptor works with all RC4 Wireless W-DIM, LumenDim, and RC4Magic Series 3 devices that are equipped with a 3.5mm DMX port.
This adaptor is required for wired RDM configuration using a DMXcat tool.
Description
This adaptor provides a wired DMX-IN port of RC4 Magic Series 3, LumenDim and W-DMX wireless receivers.
Can be used as DMX-IN port for wired DMX-512 or RDM control.
For RC4 Magic, LumenDim dimmers this adaptor provides a wired RDM port. Read this article for more
Use this DMX-IN adaptor for RDM configuration of the RC4 Dimmer (with e.g. DMXCat).
When connecting by wire, only one DMX data source should be active at a time; the RF data stream should be disabled. Do this by either:
1. Unlinking the radio from the transmitter, OR
2. Unplugging the wired DMX input to the transmitter, OR 3. Turning off the transmitter.
Now your wired RDM controlled is the only DMX data source and it will work as expected. When you are done configuring things, you can re-establish the wireless connection by ensuring that:
1. The receiver is linked to the transmitter, AND
2. Your DMX controller is connected to the transmitter, powered up, and working, AND 3. Your wireless transmitter is powered on and in transmitter mode.
Additional information
| Weight | 0,1 kg |
|---|
