W-DIMm3 Mini Dimmer für W-DMX 3-Kanal

789,00  689,00  *

Ein kleiner batteriebetriebener 3-Kanal W-DMX Dimmer für LEDs, Lampen und Motoren in kleinen Requisiten, Kostümen und vieles mehr.

Bestell-Nr.: rwm3 Kategorie: Schlüsselworte: , , ,

Beschreibung

Check out RC4 Series 3 Tutorial and Demonstration Videos Here.

The new RC4 Series 3 W-DIMm3 is a battery-powered 3-channel wireless DMX dimmer for small props, costumes, and more.  A genuine Wireless Solution W-DMX radio receiver is built-in, compatible with numerous wireless DMX products from a range of manufacturers.

With super-smooth LED dimming, high-power halogen dimming, hobby servo-motor control, HSL color control, a sophisticated effects engine, and DMX input/output (both wireless and wired), a single W-DIMm3 could be used to construct a complete miniature moving light, and is barely larger than a matchbox. RC4 understands the demands facing lighting professionals, propsmasters and special effects gurus in live entertainment and motion pictures.

The smallest wireless dimmer in the W-DIM class, the RC4 Series 3 W-DIMm3 provides three dimmers.  Like all RC4 Series 3 devices, it includes a built-in radio receiver and uses RC4 OneTouch™ for easy assignment of any DMX channel and dimmer curve to any dimmer with a single press of a single button.  Optionally, device configuration can also be done with Remote Device Management (RDM requires an RDM-capable W-DMX transceiver card in the W-DIMm3 and an RDM-capable W-DMX transmitter).

Three channels

Three channels are ideal for Red-Green-Blue (RGB) LED color-mixing.  The RC4 Hue/Saturation/Level (HSL) Color Controller delivers best-in-class color consistency over the entire dimming range, by ensuring precise primary color ratios even at very low dimmer levels using 16-bit (65,536 step) dimming.  Unlike single-channel DMX control of color mix from a console, which is limited to 256 steps and becomes heavily quantized at low levels, the RC4 HSL Color Controller maintains high ratiometric precision throughout the dimming range.

The warmth of incandescent lighting has long been favored by lighting designers, and for good reason; natural filament persistence ensures smooth fades even when control resolution is relatively coarse.  RC4 Digital Persistence™ brings this same pleasing smoothness to LED dimming, with a range of  eight persistence periods emulating a variety of halogen lamp sizes.  LEDs have never looked this good.

Many pulse-width-modulation (PWM) dimmers look good to the human eye, but produce banding, blinking, and other anomalies when used with video cameras.  For this reason, all RC4 Series 3 dimmers provide multiple PWM frequencies.  Low frequencies are most efficient, ideal for high-wattage incandescent lighting.  Mid frequencies improve the appearance of LEDs by eliminating visible strobing in human peripheral vision.  High frequencies eliminate video artifacts.  And finally, supersonic PWM frequencies, though least efficient for power handling, provide PWM dimming without audio interference when used near microphones and electrified musical instruments.

Connection

Screw terminals are provided for connection of the power supply (+/-DC IN) and load devices (+/-DimA, +/-DimB, +/-DimC). The supply powers both the internal electronics and the connected loads. Dimmers switch on the negative side of the circuit, ideal for common-anode (common positive) LED tape.  Dimmer output voltage is precisely the DC power input voltage with no appreciable losses within the 16A total power handling limit of the device.

Wired DMX data port

The DMX miniplug port can be used with a range of RC4 DMX cables, including 3-pin and 5-pin male and female XLR adaptors.  The most common adaptor is the RC4DMX5FA with 5-pin female XLR connector.

Zusätzliche Information

Gewicht0.15 kg

Technische Daten

Dimensions: 80mm x 40mm x 20mm

Power Input: 5VDC – 35VDC, 0.4W idle draw, ~87% regulation efficiency, screw terminal connections

Dimmer Outputs: 3 low-voltage DC dimmers, screw terminal connections, 16-bit resolution PWM (16,384 steps)

Output Power, per Dimmer: 10A non-continuous, 5A continuous

Maximum Total Power Handling: 16A (limited by rating of input screw terminals)

Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio)

Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW)*.

RC4 Digital Persistence™: 8 user-selectable persistence periods emulating a range of filament lamps*

Series 3 Versatility: wired and wireless DMX dimming, RC4 Flkr Effects Engine™, RC4 HSL Color Controller, RC4 HotPatch™, extensive wired RDM support (optional wireless RDM support).

Sensors: Input voltage, internal temperature, total current draw (sum of 3 dimmers)*

DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support*.

Wireless DMX Protocol: Wireless Solution W-DMX G4

RF Antenna: hidden internal, omnidirectional.

* All RDM features are available using a wired DMX connection.  Wireless RDM is available as an option, requiring installation of an RDM-capable W-DMX card and an RDM-capable W-DMX transmitter.

Downloads

Das könnte dir auch gefallen…