Powersensor

248,00 278,00  *

Out of stock

The PowerSensor can synchronize an effect of a switched / destroyed practical with film lighting by electrical detection.

Description

Automatically synchronize film lighting with a switched practical.

The PowerSensor can synchronize an effect of a switched / destroyed practical with film lighting by electrical detection.

Simply plug-in the practical into the detection input.

The PowerSensor can trigger any preset/effect producible with the LFXHub by electrical detection.

Control an unlimited load of lamps connected at the DMX-512 output of the LFXHub – with a switched practical.

No re-wiring of practicals required, just plug & play.

The Powersensor is the choice for SFX related sync of lighting effects.

Let the talent switch the set lighting!

Powersensor + LFXHub: sync a switched practical with fillm lighting

Additional information

Weight 1,5 kg
connector version lfxhub

BS 1363, CEE 7/V, Schuko

Specifications

order code pose
operating voltage 200…240 VAC/50…60Hz
operating temperature 0°C …70°C (32°F … 158°F)
dimensions (l x w x h) 168 x 108 x 59 mm (6.7″ x 4.3″ x 2.4″)
weight 920 gramms (2 pds)
includes 3.5 m control cable plugged into analog INPUT of the LFXHub
Detection circuit
load detection voltage 200…240 VAC/50…60Hz
max. detection load 1100 W
min. turn-on load (low mode) 25W
min. turn-on load (high mode) 40 W (for inductive loads)
max- turn on delay 13 msec
all specifications are subject to change without prior notice

Downloads

You may also like…

Title

Go to Top